- News Center
- Company news
- Industry information
- Stainless steel 06
- Stainless steel 07
- Stainless steel 05
- Stainless steel 03
- Stainless steel 04
- Stainless steel 01
- Stainless steel 02
- Aluminum castings 05
- Aluminum castings 04
- Aluminum castings 03
- Aluminum castings 02
- Aluminum castings 01
- Aluminum die-casting product 08
- Aluminum die-casting product 07
- Aluminum die-casting product 06
- Aluminum die-casting product 05
Company news
Position:Home > News Center > Company news
- Causes and prevention of stomatal bubbles in aluminum castings
- Editor:Hangzhou Hongcheng Pml Precision Mechanism LtdDate:2017-04-01 10:55 Click:
People who use aluminum castings should know that there are many defects in their usage, including the formation of stomatal bubbles. According to our Hangzhou aluminum casting manufacturer experience, when aluminum castings produce blowhole bubbles, there are the following characteristics:
Three the holes in the casting wall are generally round or oval, with smooth surfaces, usually shiny oxide scales and sometimes oil yellow. The surface pores and bubbles can be found through sandblasting. The internal pores and bubbles can be found through X or mechanical processing. The pores and bubbles are black on the X light negative.
Why do we generate stomatal bubbles? We think it is mainly due to the following reasons:
Two, type (core) sand mixed with organic impurities (such as coal dust, grass roots, horse manure, etc.);
Three. Poor casting and sand core ventilation;
Four. The surface of the cold iron has a shrinkage cavity;
Five. The design of the gating system is bad.
Therefore, in order to avoid the occurrence of blowhole defects in aluminum castings, we summarized a series of prevention methods:
First, correctly grasp the pouring speed and avoid getting involved in gas;
Two, type (core) sand should not be mixed with organic impurities to reduce the air volume of molding materials;
Three. Improve the discharge capacity of (core) sand;
Four. The correct selection and treatment of cold iron;
Five. Improve the design of the gating system.
As for the use of aluminum castings, if you meet a lot of defects in this process, we can directly contact our Hangzhou aluminum casting manufacturer for consultation. Sincerely look forward to your call!